![background image](http://html1.mh-extra.com/html/volt/vpl-1001-4-bbz/vpl-1001-4-bbz_installation-instructions_1046317004.webp)
w w w . v o l t l i g h t i n g . c o m
Install Fixture to Stake
5
Wire Connection
6
Fixture
Stake
Pigtail
Wireway Slot
Pigtail
Main Supply Cable
Wire Connectors
Install/Replace Bulb
Reverse Step 4 - Step 2 to expose the Bulb and replace it with correct
wattage and type marked on fixture label. Reinstall Diffuser.
IMPORTANT: LED lamp must be protected from moisture and dust at all
times. Always reinstall diffuser when moved.
[email protected] • 813.978.3700
- 7 -
- 6 -
Clear away an area in the ground at the
wireway slot on top of the stake. Lay
the luminaire pigtail into the wireway
slot and screw the stem onto the stake.
If the assembly does not look straight,
adjust by pushing or pulling on the
stake only. Use a bubble level against
the side of the stem to make sure it is
perpendicular to the ground.
Strip both leads from the luminaire pigtail. Using two wire connectors
(sold separately), connect the leads from the luminaire to the main low voltage
supply cable leads.