w w w . v o l t l i g h t i n g . c o m
INSTALLATION INSTRUCTIONS
- 6 -
VOLT
®
LED Hardscape Lights
VHS-67XX Series
Install Luminaire
5
Install the luminaire and shield using provided self-tapping screws.
If the screws are difficult to install, mark holes and drill 1/8” pilot
holes.
If wall anchors are required, drill proper holes from the marks on
the mounting surface and then insert the wall anchors. Then install
the luminaire and shield and secure them with the self-tapping
screws.
Rubber washers are required during installation from the side.
NOTE: DO NOT OVER TIGHTEN SCREWS.
Return to Step 3 to complete the wire connections.
Self-tapping
Screw
Luminaire
Railing, Deck
over-hang or Stair
Mark
Install from Bottom
Install from Side
Self-tapping
Screw
Luminaire
Mark
Wireway
Hole
Railing, Deck
over-hang or Stair
Wireway Hole
Shield
Shield
Wall Anchor
Rubber
Washer
