Package Contents
Products Model #
Important: Please Read Before Installation
INSTALLATION INSTRUCTIONS
A. (1) Fixture Body
!
w w w . v o l t l i g h t i n g . c o m
[email protected] • 813.978.3700
Important Safety Instructions
!
- 2 -
- 3 -
VOLT
®
Floodlight with Motion Sensor
VFL-40XX-MS-LI-ABZ
1. This LED Floodlight uses the latest in solid state lighting technology for
long life, low maintenance, and high efficiency.
2. The same as traditional HID lighting. There are two installation
methods, suitable for various occasion.
3. An internal power-factor-corrected switch-mode supply allows it to be
used from any nominal 100V-277V, 60Hz AC supply without any variation
in light output.
4. Suitable for use in the following locations:
a. Ambient Temp: -20~+40°C (-4~+104°F)
a. Wet Locations
Note: Save these instructions for future reference.
To avoid the risk of fire, explosion, or electric shock, this product should
be installed, inspected, and maintained by a qualified electrician only, in
accordance with all applicable electrical codes.
To avoid electric shock:
1. Be certain electrical power is OFF before and during installation and
maintenance.
2. Luminaire must be connected to a wiring system with an equipment
grounding conductor.
To avoid explosion:
1. Make sure the supply voltage is the same as the rated luminaire voltage.
2. Do not install where the marked operating temperatures exceed the
ignition temperature of the hazardous atmosphere.
3. Do not operate in ambient temperatures above those indicated on the
luminaire nameplate.
For supply connections use wire rated for at least 90°C (194°F)
Warning: the luminaire shall be installed by qualified electrician.
Model
Input
Voltage
Power
Factor
Watt
Input
Current
Finish
Mounting
10W Flood Light
AC 120V
>0.9
10W
0.1A
Bronze
Powder
Coat
Yoke
30W Flood Light
AC 120V
>0.9
30W
0.3A
Bronze
Powder
Coat
Yoke
50W Flood Light
AC 120V
>0.9
50W
0.45A
Bronze
Powder
Coat
Yoke
Product Dimensions
4.25”
3.45”
6”
3.5”
4.25”
4.5”
2.15”
2.55”
10W Flood Light
2.85”
R0.15”
Ø0.85”