Vollrath Stoelting O431, Руководство по обслуживанию

Страница: 14 / 75

6
Table 1-1 IntelliTec Control Settings
IntelliTec Control Setting Specifi cations
Basic Menu
DISPLAY Value MODE DEFINITION
CutOut * Serve Amp draw setting for cut out
Cut In T 21°F Serve Temperature setting for cut in
Cycles 20 Serve Freezing cycles before going into Standby Mode
Stir On 15 sec Serve Stir-only on time
Stir Off 300 sec Serve Stir-only off time
Advanced Menu
DISPLAY Value MODE DEFINITION
On Time 28 sec Standby Freezing cycle “on” time (runs on timers only)
Off Time 450 sec Standby Freezing cycle “off” time
Stb Time 120 sec Standby Total time in mode
Sl1DrvOn 120 sec Sleep 1 Drive motor “on” timer
Sl1DrOff 180 sec Sleep 1 Drive motor “off” timer
Sl2CutIn 32°F Sleep 2 Cut in temperature
Sl2CtOut 28°F Sleep 2 Cut out temperature
DftOffTm 600 sec No Sensor Default “off” time. Used in case of sensor failure
Storage Menu
DISPLAY Value MODE DEFINITION
Refriger Cabinet All Set to None, 1 Hopper, 2 Hopper, or Cabinet
CabCutIn 37°F All Refrigerated cab cut in temperature
CabCtOut 33°F All Refrigerated cab cut out temperature
Cab Off 13 min No Sensor Default “off” time. Used in case of sensor failure
Cab On 130 sec No Sensor Default “on” time. Used in case of sensor failure
* The CutOut value needs to be adjusted to product requirements. Refer to the 2187295 - Speci fi cation Sheet for O431
Control located in the plastic pouch behind the header panel.