Volkswagen Passat 2011 Скачать руководство пользователя страница 137

Страница: 137 / 188

– Pull protective strip off wiper blade from bottom to top, as

shown in illustration.

– Carefully place wiper arm back onto windscreen.
– Switch ignition on and briefly press the wiper lever to move the

wipers back to park position. Switch ignition off again.

4.47.2

Wiper blade protection, version 2: re‐

moving

– Switch ignition on and off briefly with bonnet closed.
– When engine is switched off, move wiper lever down to touch-

wipe function within 10 seconds.

The wiper blades move to the service position.
– Lift the wiper arm away from windscreen.

Caution

When doing this, do not touch the wiper blade to prevent dam‐

age.

– Pull protective strip off wiper blade upwards, as shown in il‐

lustration.

– Carefully place wiper arm back onto windscreen.
– Switch ignition on and briefly press the wiper lever to move the

wipers back to park position. Switch ignition off again.

4.47.3

Wiper blade protection, version 3: re‐

moving “transport wiper blade”

– Switch ignition on and off briefly with bonnet closed.
– When engine is switched off, move wiper lever down to touch-

wipe function within 10 seconds.

The wiper blades move to the service position.
– Lift the wiper arm away from windscreen.

Passat 2011 ➤ , Passat Variant 2011 ➤

Maintenance - Edition 01.2019

4. Descriptions of work:

133

Содержание Passat 2011





























































































































































































Результаты поиска

Содержание Passat 2011

Отзывы:

Похожие инструкции для Passat 2011

Бренды по названию

Популярные бренды

Volkswagen Passat 2011, Руководство по обслуживанию

Результаты поиска

Содержание Passat 2011

Отзывы:

Похожие инструкции для Passat 2011

Бренды по названию

Популярные бренды