13
ATTACH THE WHEELS
Before you begin: Remove the nuts and washers from the
end of the axles, and keep them handy for the following
assembly steps.
❶ Slide the large washer over the axle until it hits the stop on
the axle. Note: the rear wheel
does not
get a larger washer
for this step. Figure 3.11
❷ Slide the wheel onto the axle until it stops at the washer.
Note: The rear wheels have a gear shape that fits into the
axle of the gear box. The front wheels
do not
have the gear
shape on the back side.
❸ Insert the second washer over the axle until it stops at the
wheel.
❹ Insert the retaining nut over the end of the axle, and tighten
the nut using the hex wrench provided in the hardware
packet.
❺ Align the five tabs on the back of the hubcap with the slots
in the wheel, and push the hubcap into the wheel until it
snaps into place.
❻ Repeat steps 1-5 for the remaining wheels.
3
1
Figure 3.11
2
4
5
Back side of the
rear wheels fit into
the gear box.
Front wheel assembly
Rear wheel assembly
