Volkswagen ID.4, Руководство пользователя

Страница: 101 / 417

Adjusting head restraints
Please refer to and at the start of
the chapter on page 98.
Fig. 78 Front head restraint: adjusting.
Adjusting the height of the front head re-
straint
— While pressing the →
Fig. 78
1
button,
push the head restraint up or down in the
direction of the arrows.
The head restraint must securely engage in
the top position or other intermediate posi-
tion. In the lowest position, where the guide
pin is completely pushed into the guide rail,
the head restraint does not engage properly.
Fig. 79 Rear head restraint: adjusting.
Adjusting the height of the rear head re-
straint
— While pressing the button →
Fig. 79
1
if
necessary, push the head restraint up or
down in the direction of the arrows.
The head restraint must engage securely into
position.
Removing and installing the
head restraints
Please refer to and at the start of
the chapter on page 98.
Fig. 80 Front head restraint: removing.
Removing the front head restraints
— If necessary, lower the head restraint.
— To release, press the ring around the head
restraint rod downwards → Fig. 80
1
.
— Pull the head restraint out in the direction
of the arrow → Fig. 80
2
.
Fitting the front head restraints
— Position the head restraint correctly over
the head restraint guides and then insert
into the guides of the corresponding seat
backrest.
— Push the head restraint down until the
guide pins click into place.
Head restraints 99
11A012720AB