6. Media Operation
It is possible to connect to the radio the following devices additional to CD player operation:
•
•
•
USB memory or iPod
AUX connection
Bluetooth audio device (A2DP/AVCRP profiles)
Radio is in FM mode and previous mode was CD, and the CD inserted in the slot. Short press HK
button and then the radio audio source will change to CD mode; radio will show the following window.
The CD mode is underlined. Users can select other mode by short press SK [2 to 4] buttons.
Note: This display screen appears only if there are one or more devices connected to radio.
Other mode to select a media is, short press HK [
source: CD -> USB (or iPod) -> AUX -> BT -> CD
] button continuously would switch to next media
15 seconds no action, short press SK 1 [CD] or short press SK 6 [
] reverts to CD mode.
At moment to insert CD / USB / IPOD into the radio’s slot, the display will show READING all of the time until radio is
ready to play and then changes to active CD / USB / I pod mode immediately. If radio is turned OFF, then radio will
be turned ON (if Kl.15 and Contact S are OFF: 30 minutes radio ON then radio OFF). only if CD / AUX IN slots are
plugged.
During reading process, volume adjustment and any other functions are not allowed; radio is muted.
At moment to connect an iPod to the radio, this connection replaces USB mode.
At moment to remove CD / USB / IPOD from the radio’s slot; if CD / USB / IPOD mode is activated, the radio will
change to LSM mode immediately; if CD / USB / IPOD mode is not activated, no action.
If CD / USB / IPOD can not read out, or other errors occur, radio will display ERROR per 2 seconds and radio reverts
to LSM.
Prepared by Hector Gomez
HMI/ VWM DTEE / 52-222-2307414
DOC_HMI RADIO 1 DIN MIB-G LAM X1.8 / 11/10/2011
Page 15 of 65
