Display
Function
Av. consumption
--.- mpg
Average fuel consumption in miles per gallon (l/100 km) on trips per trip
memories 1 and 2 (toggle) is displayed once the vehicle has been driven
about 330 feet (100 m). Until then, dashes appear instead of a number.
The value displayed is updated every 5 seconds.
Av. consumption
--.- l/100 km
Range
-- mi
Estimated distance in miles (km) that the vehicle can go with the fuel left
in the tank the way you are currently driving. Takes account of the cur-
rent fuel consumption, among other things.
Range
-- km
Route -- mi
Distance driven in miles (km) per trip memories 1 and 2 (toggle).
Route -- km
Average speed
-- mph
Average speed on trips per trip memories 1 and 2 (toggle). Displayed
once the vehicle has been driven about 300 feet (100 m). Until then,
dashes may appear instead of a number. The value displayed is updated
every 5 seconds.
Average speed
-- km/h
-- mph
Digital display of the current vehicle speed.
-- km/h
Speed warning
--- mph
When the set speed (from 20–155 mph or 30–250 km/h) is exceeded, an
acoustic warning sounds and a visual message may also appear in the
instrument cluster display.
Speed warning
--- km/h
Switching between the displays
x
Use the arrow up and down buttons
*
and
+
on the multi-function steering wheel.
Storing speed for the speed warning
x
Navigate to MFI > Speed warning (
Speed warning -- mph
or
Speed warning -- km/h
)
display.
x
Press the
OK
button to save the current speed and to activate the warning.
x
If the speed is not right, press buttons
*
or
+
on the multi-function steering wheel to set a different
speed within about 5 seconds. Then press the
OK
button a second time or just wait a few seconds.
The speed is saved and the warning is activated.
x
To deactivate
, toggle to
--- mph
or
--- km/h
and press the
OK
button. The set speed is deleted.
Manually erasing trip memory 1 or 2
x
Navigate to
MFI
>
Route
.
x
Select the memory to be erased.
x
Press the
OK
button for about 2 seconds.
Enabling and disabling displays
Use the
Settings
menu, submenu
MFI data
to enable displays you want to be available under the
MFI menu in the instrument cluster display. The units in which data is displayed can also be changed
,
Settings menu
.
Settings
menu
¤
Please first read and note the introductory information and heed the WARNINGS