9 / 12
Channels Reactions Checking
Channels Reverse
Place your plane in a neutral position, follow below steps to check the channels
reactions.
Move the sticks(except the throttle stick) to see if all servo surfaces react correctly as
shown in the left diagram(left throttle for example).
Swing your plane to check if all servo surfaces react correctly as shown in the right
diagram.
Swing The
Plane
Reaction
Transmitter
Operaton
Reaction
WARNING:
Normally this function is not necessary to be operated. Only operate the
below steps when you understand completely of the channel reverse function.
1.Turn the throttle stick to min position.
2.Power on the Transmitter and the receiver.
3.Do
NOT
unlock the throttle.
4.Turn the channel stick to max position of any side and hold for several seconds.
5. When you hear a “beep” sound, it means the channel is reversed.
Charging Instruction
1. Unplug the battery from your plane.
2. Carefully plug the charger into the USB
port on your computer or USB adapter.
3. Connect battery into the charger.
