VolantexRC RANGER400, Руководство пользователя

Страница: 5 / 12

5 / 12
Center Control Surfaces
NOTE: Keep the transmitter power off until you finish the checking of the control
surfaces.
With the battery conected to the airplane, it is now possible to check the center of all
control surfaces.
Observe the rudder to ensure it is properly centered as shown above at the left.
4. Setup is done.Follow below instructions
to finish adjustment before start flying the
vehicle.
3. Put on the canopy and secure with the
latch.
Then observe the elevator to ensure it is properly centered as shown above at the right.