VolantexRC Racent EXA78502R, Руководство пользователя

Страница: 3 / 12

3 / 12
Battery Warnings
and N iMH batteries also used i n RC applications. All i nstructions and warnings must b e followed exactly to
throttle/ power than typical to maintain cruise or climb you should land the airplane and disconnect the LiPo
battery immediately .
By handling, charging or using the included LiPo battery you assume all risks associated with LiPo batteries. If
you do not agree with these conditions, please return your complete product in new, unused condition to the
place of purchase immediately.
You must read the following safety instructions and warnings before handling, charging or using the LiPo
battery.
appropriate charger and settings).
To charge the battery you must use only the stock included Charger or a suitably compatible LiPo battery
NiCd or NiMH charger to charge Li-Po battery.
If at any time during the charge or discharge process the battery begins to balloon or swell, discontinue
charging or discharging immediately. Quickly and safely disconnect the battery then place it in a safe , open
a small amount must be removed from service completely.
Store the battery partially charged ( approximately 50% charged/3.85V per cell), at room temperature
When transporting or temporarily storing the battery, the temperature range should be from approximately
LiPo cells should not be discharged to below 3.0V each under load. In the case of the 2-Cell/ 2S 7.4V LiPo
(regardless of the power level you have set with the throttle stick) to let you know the voltage of the battery is
close to the 6.0V minimum.
is required to cruise or climb you should land the model and disconnect the battery immediately to prevent
over-discharge.
entirely which is not covered under warranty).
Never charge the LiPo battery unattended at any time. When charging the battery you should always remain
in constant observation to monitor the charging process and react immediately to any potential problems that
may occur.