background image

2 / 12

The following terms are used throughout the product literature to indicate various levels of potential harm 

when operating this product:

NOTICE:

 Procedures, which if not be properly followed, will create a possibility of physical property 

damage AND or possibility of injury.

WARNING:

 Read the 

ENTIRE

 instruction manual to become familiar with the features of the product 

before operating. Fail to operate the product correctly can result in damage to the product, personal 

property and cause serious injury.

This is a sophisticated hobby product. It must be operated with caution and common sense and requires 

some basic mechanical ability. Fail to operate this product in a safe and responsible manner could result 

in injury or damage to the product or other property. This product is not intended for use by children 

without direct adult supervision. Do not use with incompatible components or alter this product in any 

way outside of the instructions provided by VolantexRC Co.,Ltd.. This manual contains instructions for 

safety, operation and maintenance. It is essential to read and follow all the instructions and warnings in 

the manual, prior to assembly, setup or use, in order to operate correctly and avoid damage or serious 

injury.

AGE RECOMMENDATION: NOT FOR CHILDREN UNDER 14 YEARS. THIS IS NOT A TOY.

 

Safety Precautions and Warnings 

WARNING

As the user of this product, you are solely responsible for operating in a manner that does not endanger 

yourself and others or result in damage to the product or the property of others.

- Always keep a safe distance in all directions around your boat to avoid collisions or injury. This boat is 

controlled by a radio signal subjuct to interference from many sources outside your control. Interference 

can cause momentary loss of control.

- Always operate your boat in open spaces away from full-size vehicles, traffic and people.

- Always carefully follow the directions and warnings for this and any optional support equipment(chargers, 

rechargeable battery packs etc.).

- Always keep all chemicals, small parts and anything electrical out of the reach of children.

- Always avoid water exposure to all equipment not specially designed and protected for this purpose. 

Moisture causes damage to electronics.

- Never place any portion of the boat in your mouth as it could cause serious injury or even death.

- Never operate your boat with low transmitter batteries.

- Always keep your boat in sight and under control.

- Always use fully charged batteries.

- Always keep transmitter powered on while boat is powered.

- Always remove batteries before disassembly.

- Always keep moving parts clean.

- Always keep parts dry.

- Always let parts cool after using before touching.

- Always remove batteries after usage.

- Always ensure failsafe is properly set before running.

- Never operate a boat with damaged wiring.

Содержание Hurricane 791-2













Отзывы: