VolantexRC Hurricane 791-2, Руководство пользователя

Страница: 12 / 12

12 / 12
Sail Checklist
NOTE: This checklist is NOT intended to replace the content included in this instruction manual. Although
it can be used as a quick start guide, we strongly suggest reading through this manual completely before
proceeding.
1. Always turn on the transmitter first.
2. Check each sail, rigging rings and fitting is properly installed and adjusted.
3. Sail the boat in a appropriate water environment.
4. We suggest you to switch Dual Rate button to 100%.
5. After running, turn off receiver power.
6. Unplug the receiver battery, place the battery in a dry, cool environment.
7. Always turn off the transmitter last.
8. Drain water out of boat hull, then place the boat in a dry, cool environment.
Troubleshooting Guide
Problem Possible Causes Solutions
The system is not
connected
Your transmitter and receiver
are too close
Take transmitter 1 to 3 meters away from receiver
You are around metal objects Try in an area with less metal objects near by
The model selected is not the
bound one
Rebind your transmitter and receiver
The receiver not
responding to the
transmitter
Low battery voltage Replace your batteries with new ones
Loose or damaged wires
between batteries and
receiver
Check the wires and connection between the battery
and receiver.
Repair or replace wires and/or connectors
Boat tends to turn
one direction
Rudder or rudder trim is not
centered
Repair or adjust rudder and rudder trim till the boat
is straight running when rudder stick is in neutral
position