Voipac iMX6 OpenRex SBC, Быстрое руководство

Страница: 6 / 20

Connecting the components and cables
Prepare iMX6 OpenRex SBC and plug in (bootable) microSD card, TTL-232R-3V3 FTDI cable,
Ethernet cable, HDMI cable and other devices or interfaces you need. Plug the power supply
connector in.
IMPORTANT! Be careful when connecting TTL-232R FTDI cable to the board.
Check if the cable conductor 1 (black wire) is connected to Pin 1 (Header
connector J3 – TTL-232R FTDI) on the board.
To boot from microSD Card, make sure
that BOOT_MODE jumper is not present.
- 6 -