manualshive.com logo in svg

VoIP GW-522FW, Руководство пользователя

Поделиться
Скачать
VoIP GW-522FW Скачать руководство пользователя страница 32

VoIP Wireless Router User’s Manual 

 

             

32

 

Compact Form:

 Check the box to represent common header field names in an abbreviated form. This may 

be useful when SIP message is too large to be carried on and recognized by the user agent.   

SIP Caller ID Obtaining: 

Select the part of the SIP packet from the VoIP Router to obtain Caller ID. There 

are several places where the Caller ID is located.   

Remote-Party-ID Display Name -

 It is located at SIP 

→

 Remote-Party-ID 

→

 Before [<sip:]  

Remote-Party-ID User Name -

 It is located at SIP 

→

 Remote-Party-ID 

→

  After [<sip:], Before [@] 

From-Header Display Name -

 The standard way is in SIP 

→

 Message Header 

→

 From 

→

 SIP 

Display info. 

From-Header User Name - 

It locates at SIP -> Message Header -> From -> SIP from address before 

[@]. 

Put Caller ID In URI: 

This feature is to put Caller ID in URL. The Caller ID is located in SIP 

→

 Message 

Header 

→

  After [From:], Before [<sip:] by default settings. It will be located in SIP 

→

 Message Header 

→

 

After [<sip:], Before [@]if ticked. 

INVITE With Remote-Party-ID Header: 

Check the box to comprise the information of Remote-Party-ID in 

the message header of INVITE. Different format of INVITE header might cause the call not to be connected. 
Please consult with your VoIP Service Provider before enabling it. 

Callee Quick Media:

 VoIP Router will send RTP to remote party immediately as user answer an inbound 

call. 

FXS Hunting For Unknown Number: 

Select the response for an incoming call which the called number is 

not exist in on the VoIP Router.   

Disable –

VoIP Router responses 404 not fornd.   

Hunt and Transit Dial –

VoIP Router sends alert to an available FXS port and dial the number to PBX 

as the FXS port picked up by PBX. It works with SoftSwitch or IPPBX to allow a remote client reach the 
PBX extension for one step dial. (For virtual extension) 

FXS Group Hunting/ Ring Type -- 

VoIP Router sends alert to an available FXS port for hunting 

group. 

Enable SIP “rport”(RFC 3581): 

ATA puts “rport” in SIP packets for SoftSwitch to deal well as ATA put 

under NAT.

 

Support URI Percent-Encoding(RFC 3986): 

Check the box to encode/decode the letters of the basic 

Latin alphabet, digits, and a few special characters which follow RFC 3986. 

Compare SIP ‘To’ Header for Transit Out:

 When there is a call from WAN interface to FXO and the 

number of Request line and “To” is different, FXO will use the number of “To” to dial out. Please consult 
your Internet Telephony Service Provider about the format of invite packet from VSP 

Call Hold Compatible With RFC 2543:

 It is used to set the procedure of Call Hold being compatible with 

RFC 2543. 

Enable SIP ‘Allow’ Header:

 It is used to put “Allow” in SIP packets. The Allow header field lists the SIP 

requests supported by ITA when ticked. 

Enable SDP ‘ptime’ Attribute:

 It is used to put “ptime” in SDP packets when ticked. 

Use Redirect URI As ‘To’ Header (Receiving 3XX):

 It is used to change the content of ‘To’ header field 

when receiving 3XX. 

Respond ‘BUSY HERE’ while no line available for hunting:

 It is used to reply ‘BUSY HERE’ to the 

calling party while no line is available for hunting. 

 

 

 

Содержание GW-522FW




























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды