manualshive.com logo in svg

Void Tri Motion, Руководство пользователя

Поделиться
Скачать
Void Tri Motion Скачать руководство пользователя страница 12

Page 12

UG10555-2.0 - Tri Motion User Guide V2.0

5 Mounting

Tools required

•  19 mm ratchet spanner/wrench
•  6 mm Allen key 

5.1 Installation safety

To avoid mechanical hazards, please note the following:

•  Safety regulations vary in different regions. Full compliance with those 

regulations must be your priority

•  Rigging must only be undertaken by fully-qualified and experienced riggers who 

understand local regulations

•  This may include consulting a structural engineer before installation of wall brackets
•  Remember that all personnel have a duty of care to themselves, to their assistants, to 

the venue staff and to the public

•  Before lifting any part of the system above head height, check the whole rig for loose 

tools or other items that may fall and cause injury

•  Do not use a telephone (even if hands-free) while rigging. Always concentrate fully on 

the rigging operation

•  Do not rig equipment that is worn, damaged, corroded, mishandled or over-stressed in any 

way

•  Use only Void-approved mounting equipment and accessories
•  Secondary safeties should be provided in all instances where cabinets are flying or fixing 

overhead and should conform to local regulations

Содержание Tri Motion






























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды