background image

Incubus System User Guide V1.1

Page 4

1.1 Important safety instructions

The lightning flash with and arrowhead symbol 
within an equilateral triangle is intended to alert the 
user to the presence of uninsulated “dangerous 
voltage” within the product’s enclosure that may 
be of sufficient magnitude to constitute a risk of 
electric shock to persons.

The exclamation point within an equilateral triangle 
is intended to alert the user of the presence of 
important operating and maintenance (servicing) 
instructions in the literature accompanying the 
appliance.

Safety instructions - read this first

1. 

Read these instructions.

2. 

Keep these instructions.

3. 

Heed all warnings.

4. 

Follow all instructions.

5. 

Do not use this apparatus near water.

6. 

Clean only with a dry cloth.

7. 

Do not block any ventilation openings. Install in accordance 
with the manufacturer’s instructions. 

8. 

Do not install near any heat source such as radiators, heat 
registers, stoves, or other such apparatus that produce heat. 

9. 

Do not defeat the safety purpose of the grounding-type 
plug. A grounding type plug has two blades and a third 
grounding prong. The third prong is provided for your safety. 
If the provided plug does not fit into your outlet, consult an 
electrician for replacement of the obsolete outlet.

10.  Protect power cords from being walked on or pinched 

particularly at plugs, convenience receptacles, and the point 
where they exit the apparatus.

11. Only use attachments and accessories specified by 

Void 

Acoustics.

12.  Only use with the cart, stand, tripod, bracket, or table specified 

by the manufacturer, or sold with the apparatus. When a 
cart is used, use caution when moving the cart/apparatus 
combination to avoid injury from tip-over.

13. Unplug the apparatus during lightning storms or when unused 

for long periods of time.

14.  Refer all servicing to qualified service personnel. Servicing 

is required when the apparatus has been damaged in 
any way, such as when the power-supply cord or plug is 
damaged, liquid has been spilled or objects have fallen into 
the apparatus, the apparatus has been exposed to rain or 
moisture, does not operate normally, or has been dropped.

15.  Since the mains power supply cord attachment plug is used 

to disconnect the device, the plug should always be easily 
accessible.

16.  Void loudspeakers can produce sound levels capable 

of causing permanent hearing damage from prolonged 
exposure. The higher the sound level, the less exposure 
needed to cause such damage. Avoid prolonged exposure to 
the high sound levels from the loudspeaker.

1.2 Limitations

This guide is provided to help familiarise the user with the 
loudspeaker system and its accessories. It is not intended to provide 
comprehensive electrical, fire, mechanical and noise training and is 
not a substitute for industry-approved training. Nor does this guide 
absolve the user of their obligation to comply with all relevant 
safety legislation and codes of practice.

While every care has been taken in creating this guide, safety is 
user-dependent and Void Acoustics Research Ltd cannot guarantee 
complete safety whenever the system is rigged and operated.

1.3 EC declaration of conformity

Manufacturer:

Void Acoustics Research Ltd,
Unit 15 Dawkins Road Ind Est,
Poole, Dorset,
BH15 4JY,
United Kingdom.

We declare the under our sole responsibility the following product 
models: Air Array, Hyperfold and Incubus Sub

are intended to be used as loudspeakers and are in conformity with 
the following EC Directives, including all amendments, and with 
national legislation implementing these directives:

• 

BS EN 60065:2002

• 

BS EN 55103-1/-2

March 2016

Alex Skan

Technical Director

1.4 WEEE directive

If the time arises to throw away your product, please recycle all the 
components possible.

This symbol indicates that when the end-user 
wishes to discard this product, it must be sent 
to separate collection facilities for recovery 
and recycling. By separating this product from 
other household-type waste, the volume of 
waste sent to incinerators or land-fills will be 
reduced and natural resources will thus be 
conserved.

The Waste Electrical and Electronic Equipment Directive (WEEE 
Directive) aims to minimise the impact of electrical and electronic 
goods on the environment. Void Acoustics Research Ltd complies 
with the Directive 2002/96/EC and 2003/108/EC of the European 
Parliament on waste electrical finance the cost of treatment and 
recovery of electronic equipment (WEEE) in order to reduce the 
amount of WEEE that is being disposed of in land-fill sites. All of 
our products are marked with the WEEE symbol; this indicates that 
this product must NOT be disposed of with other waste. Instead 
it is the user’s responsibility to dispose of their waste electrical 
and electronic equipment by handing it over to an approved 
reprocessor, or by returning it to Void Acoustics Research Ltd for 
reprocessing. For more information about where you can send 
your waste equipment for recycling, please contact Void Acoustics 
Research Ltd or one of your local distributors.

1 Safety and regulations

Содержание Incubus Series









































Отзывы: