VoiceSolo VSM-200P, Руководство пользователя

Страница: 8 / 13

6
BACK PANEL
1. Speakon
®
combo input jacks
These jacks allow either a 1/4” speaker cable or Speakon
equipped speaker cable to connect to VoiceSolo. These
jacks are paralleled and can be used to chain several
VSM-200P units together. Thus, both jacks are designated
as IN/THRU.
A note about chaining multiple VoiceSolos
Your VSM-200P has an impedance, or ohms rating, of 8
Ohms. Chaining two VSM-200Ps together lowers the
impedance the amp will have to drive to 4 Ohms. Most
amps will work fine at 4 Ohms even when pushed to
produce loud volume levels.
Chaining three VSM-200Ps will lower the impedance to 2.6
Ohms and adding a fourth VSM-200P will bring the
impedance to 2 Ohms. Consult your amplifier’s manual to
confirm that it is capable of driving a 2 Ohm load.
Note that all Ohm ratings are specified with the volume
control set to maximum.
2. Power handling legend
This legend describes the amount of power your VSM-
200P will accept with various types of program material.
60W / AVERAGE: Also known as RMS, this means that
VoiceSolo will accept audio of constant level e.g. a sine
wave test signal of 60 watts for an extended period of time.
120W / PROGRAM: This rating describes how many watts
VoiceSolo can accept over an extended period of time with
dynamic program material such as what a band or singer
would produce.
240W / PEAK: This is the maximum VoiceSolo can
withstand for a very brief period of time.
1
2