Page 12 of 15
Manual VENIA-8sp DDA - 2021-12 EN
Easyfly mechanics
Tool-less flight mechanism for clicking in and exact alignment of the
loudspeaker in the horizontal and vertical axis.
1. Pull the two locking bolts (A) upwards and let them engage by
turning them slightly.
2.
Insert the Easyfly mechanics into the flying track (B).
3.
Slide the mechanics backwards as far as it will go.
4. Let the two locking bolts snap into the intended holes on the
flying track.
Note:
Notice that the two locking pins (A) are engaged to pre-
vent the Easyfly-Mechanics from slipping out.
Installations with Easyfly mechanics
Installation with self-lock clamp (C) on trusses.
1.
Mount the self-lock clamp to the Easyfly mechanics using an
M10 threaded screw and lock nut.
2. Hang the clamp and holder into the mechanics using ball lock
bolts.
3.
Hang the loudspeaker into the truss.
4.
Adjust the inclination by fixing the holder on the top hole rail
with the ball locking pin.
Installation with universal suspension arrangement for flight mecha
-
nics (D) on high ceilings
1.
Mount the universal suspension arrangement for flight mecha
-
nics with an M10 threaded screw and lock nut to the mounting
of the Easyfly mechanics.
2. Hang the suspension device and holder into the mechanics
using ball locking bolts.
3.
Hang the loudspeaker into the installed chains.
4.
Adjust the inclination by fixing the holder on the top hole rail
with the ball locking pin.
Note:
The inclination depends on the hole in which you fix the
Easyfly mount on the hole rail!
Working with VENIA-8sp DDA
C
D
A
B
