Vogue P640STG, Инструкции по установке и эксплуатации

Страница: 3 / 10

This manual explains the proper installation and use of your appliance, please read it
carefully before using even if you are familiar with the product. The manual should be kept
in a safe place for future reference. In case of failure, only the Authorized Technical
Service may repair this hob. Otherwise the guarantee will be null and void.
Warning
General safety
l The appliance may only be installed and connected
by trained, Authorised persons .
l Built-in appliances may only be used af ter they have
built in to suitable built-in units and work surf aces
that meet standards.
l In the event of faults with the appliance or damage
to the glass toughened (cracks, scratches or splits),
the appliance must be switched off and
disconnected from the electrical supply, to prevent
the possibility of an electric shock.
l Repairs to the appliance must only be carried out by
trained
Authorised persons
.
l The technical and identification data for the hob
figure on the ref erence plate fixed to the appliance.
l This ref erence plate must be consulted before
making the electrical connections.
l The electrical connections must be made by
specialist aware to the legal and regulatory,
requirements in each country.
l If the cable is damaged in any way it must be
replaced by the manufacturer or after sale service
or by authorized technical staf f, to avoid hazard.
Correct use
l People (including children) who, because of their
physical, sensory or mental capabilities or their
inexperience or ignorance are not able to use the
device safely, should not use this device without
supervision or instruction by a responsible person.
l This appliance should be used only for normal
domestic cooking and frying of food.
l The appliance must not be used as a work surf ace
or as a storage surface.
l Additions or modifications to the appliance are not
permitted.
l Do not place or store flammable liquids, highly
inf lammable materials or fusible objects (e.g. plastic
film, plastic, aluminum) on or near the appliance.
l Do not heat an empty pan on the appliance.
Children’s safety
l The cooking zones will become hot when you
cook. Theref ore, always keep small children
away from the appliance.
l The appliance is not intended for use by
young children or inf irm persons without
supervision.
l Young children should be supervised to
ensure that they do not play with the
appliance.
Safety during use
l Remove stickers and film from the glass
ceramic.
l There is the risk of burns from the appliance if
used carelessly.
l Cables from electrical appliances must not
touch the hot surf ace of the appliance or hot
cookware.
l Overheated fats and oils can ignite very
quickly. Warning! Fire hazard!
l Switch the cooking zones off after each use.
l Users with implanted pacemakers should
keep their upper body at least 30 cm from
cooking zones that are switched on.
l Risk of burns! Do not place objects made of
metal, such as knives, forks, spoons and
saucepan lids on the cooking surf ace, as they
can get hot.
2
17
TROUBLESHOOTING
Servicing of the hotplates must only be done by an authorised service representative (see back of this booklet) and the
hotplate must not be modified. Power must be disconnected before any servicing or maintenance is conducted.
l Clean the panel: Suggest each clean after cooking
l Clean ignition needle ,thermocouple , burner and Pan support: Recommended cleaning at least once a month
Abnormal conditions include:
l Excessively yellow or sooting flame type.
l Flame lifting off the burner ports.
l Flame lighting back into the burner (normally associated with a popping sound).
l Objectionable odour of the flames combustion products.
Should a faulty condition develop in the hotplate that is not described above, refer to the following table first for
possible causes and remedies prior to contacting an authorised service representative. Servicing beyond the remedies
listed shall only be undertaken by an authorised service representative.
FAULT POSSIBLE CAUSE REMEDY
No spark when gas control
knob depressed.
No power.
Check plugged in and switched on.
Check mains circuit breaker.
Loose sparker cable. Call authorised representative.
Burner not aligned properly. Remove and re-fit burner.
Burner not lighting when
spark ignition working.
Gas supply off. Check gas supply valve on.
Burner not aligned properly. Remove and re-fit burner.
Burner ports blocked. Remove, clean and replace burner.
Burner goes out when
control knob released.
Flame safeguard not activated.
Re-light, allow more time for flame safeguard
to activate.
Flame safeguard faulty connection or
broken.
Call authorised representative.
Uneven flame pattern or
slight flame lifting.
Burner ports blocked. Remove, clean and replace burner.
At minimum flame setting
the flame is too high.
Turndown control setting incorrect. Call authorised representative.
Small flame on High
setting.
Regulator faulty. Call authorised representative.
Gas supply pressure low. Call authorised representative.
Incorrect injector fitted. Call authorised representative.
Blocked injector or gas supply tube. Call authorised representative.
Incorrect utensil size.
Refer to operating instructions utensil
choice.
Flame too high on High
setting.
Regulator faulty. Call authorised representative.
Incorrect injector fitted. Call authorised representative.
Incorrect utensil size.
Refer to operating instructions utensil
choice.