8
START USING YOUR RANGEHOOD
Electronic button with LED display & remote
After connecting to power, the control panel will be lighted and the buzzer will sound once.
The output is off and the hood enter into standby mode.
On/Off
Switches the ventilation on and off.
Light
Switches the light on and off. Please note the Lamp is not under control of
the on/off button.
Ventilation
Speed
The motor has the low speed, mid. speed and high speed.
When the hood is working with low speed, LED display will show 1.
Press the button, then the hood will transfer to the mid speed for working;
the LED will show 2 , press the speed button again , the hood will transfer
to the high speed for working immediately. And so on…
Timer
This is a 9 minute timer. When the hood is working, press this button to set
a time for motor operation. Press the button ,LED display will be shown
9.8.7.6 until 0, When LCD shows 0, the hood will be off automatically and
the lamp will extinguish. If keep pressing “Timer” button, the hood will go in
or go out “Timer” function.
Connecting the remote control
• A New remote control has to establish a new connection to the cooker hood when used for
first time. One remote control could possibly control several cooker hood at the same time.
Connection process between remote control and Rangehood
• Within 15S after the cooker hood connects to the power supply, long press for 5 seconds, the
indicators light begin flashing from one button to another ,the cooker hood is in connection
mode, press any button on remote control to confirm the connection. The connection process
finished and the remote control can be used for speed selection, lighting and timer setting.
• If you want to connect again, you will need to clear the code that has been set up previously.
• To clear the code, press for 5 seconds, the indicators light begin flashing from one button to a
other, the cooker is in connection mode. Then, press again for 5 seconds, the previous
connection code is cleared.
• When the previous code has been cleared, the cooker hood back to standby mode, press
for 5 seconds, the indicate light flashing from one button to another ,the cooker hood is in
connection mode, then, press any button on remote control to confirm the connection.
