Vogue 330267, Инструкции по установке и Руководство пользователя

Страница: 7 / 7

INSTALLING THE RANGEHOOD
NOTE: At least two people will be required to mount the hood.
1. Before beginning the installation remove all plastic film, the filters & the
oil catcher which is held in with 2 thumb screws. When it is removed
there are 3 cut outs to provide access to the screw mounting holes.
2. Before installing the hood to the cupboard unit drill a 165mm diameter
hole for the 150mm ducting in the top of the cupboard and ceiling.
3. Check the location of the power outlet and consider the location of the
power cord.
4. On the side of the hood are 2 spring clips to assist installation. Adjust the
height of the clip to match the thickness of the mounting panel. The hood
can then be slid into the opening and these springs will take some of the
weight while the screws are fitted.
5. Lift the rangehood and fit through the opening of the cabinet feeding the
ducting up through the pre-drilled holes.
6. Secure the unit using 6 long mounting screws, 3 on each side.
7. Refit the oil catcher being careful not to scratch the hood and then fit the
filters.
INSTALLING THE FILTERS
1. To remove the baffle filter, push on the metal latch tab. This will
disengage the filter from the hood. Tilt the filter downward and remove.
Be careful not to drop the filter.
2. To install the baffle filter slot the back edge into the channel and push
against the spring clips. The filter will swing up and lock into position.