![Vogue 310140 Скачать руководство пользователя страница 12](http://html.mh-extra.com/html/vogue/310140/310140_installation-instructions-and-user-manual_1044551012.webp)
12
Installing your Freestanding Cooker
Electrical connection
IMPORTANT: Electrical connections must be carried out by a suitably qualified person and in
accordance with all relevant local building and installation regulations.
Connecting appropriate power supply terminal board/ connector block:
Using a screwdriver, prize open tabs of the Terminal board cover.
Remove the wire clamp screw.
Fasten cable clamp and close the cover of the terminal board.
The ac power supply should be 220-240 V, 50/60 Hz. For electric cookers, the minimum
45A fuse, or at least 45A distribution circuit breaker.
Fasten the wires beneath the corresponding screw heads, using brass ‘bridge’ for single
phase supply.
Fitting on a Power Supply Cable
Warning:
Connect the power cord in accordance with the instructions listed in the table below.
Wire cross-sectional area(mm2)
Connection mode
L
N
E
1N~
Min4
Min4
Min4
Connecting the supply cable to the mains
Install an approved circuit breaker with a minimum contact opening of 3 mm, between the
appliance and the mains fuse box .The circuit breaker should be sized according to the load
and should comply with current regulations (the earth wire should not be interrupted by the
circuit breaker).