TR008 | 20110503.1
www.vogelzang.com
DURANGO™
| Page 25
Edit Notes
060706.0
INITIAL LAYOUT BASED ON TR003 HIGHLANDER MANUAL (NON-CANADIAN)
110306.0
INITIAL DRAFT VERSION FOR EPA EVALUATION. DRAWINGS & PARTS LISTS FROM ASSEMBLY
DRAWINGS.
120106.0
ADD ASSEMBLY ILLUSTRATIONS (FIG. 1 & 2) PAGE 3. MODIFY INSTRUCTIONS PER TESTING
CONSULTANT RECOMMENDATIONS.
012407.0
EDITS FOR UL SUBMISSION. REVISE DRAWINGS TO ELIMINATE NON-REPLACABLE (WELDED)
COMPONENTS. CONSECUTIVE NUMBERING FOR STOVE BODY AND DOOR PARTS.
012607.0
REVISE DRAWINGS TO ELIMINATE WASHERS. NUMBER AIR TUBES (WERE LETTERED) RE-NUMBER
PARTS TO ELIMINATE “A” AND “B” PART NO. REFERENCES (ExCEPT FIRE BRICKS). ADjUST PART NO.
REFERENCES IN ASSEMBLY INSTRUCTIONS ON PAGE 3.
050207.0
ADDED NOTICE REGARDING CURING PAINT FOR THREE INITIAL FIRES (PG 11) AND ADDITIONAL
LINE IN SAFETY PRECAUTION #7 PAGE 2.
050207.1
ADDED NOTATION ABOUT NOTCH SIzE IN BOTTOM HEAT DEFLECTOR ASSEMBLY TO ENSURE
PROPER ORIENTATION DURING INSTALLATION (PG 3, #5). REVISED CAUTION IN CURING PAINT
INSTRUCTIONS TO “PROVIDE ADEQUATE VENTILATION” DURING CURING BURNS (PG 11)
050207.2
CORRECTED R-FACTOR SPECS (PG 4) “...0.8 R-FACTOR...” [20 SEPTEMBER 2007]
050207.3
CORRECTED DIMENSIONS ON FIG 3, TOP VIEW CLEARANCES, PAGE 4
051810.0
REFORMAT MANUAL. ADD LATEST (“B” VERSION) SAFETY PRECAUTIONS THROUGHOUT
052010.0
ADDED DIMENSIONS TO C-CAST FIBERBOARD FRONT (14x9-5/8”) & REAR (14x14”). REVISED
DRAWING.
050311.0
CORRECT INTERTEK CHIMNEY SYSTEMS INSTRUCTIONS, PG 22, A 12-INCH NOT 2INCH + ADD
METRIC EQUIVALENTS
050311.1
RE; PAGE 6, HEADING #1 PLEASE CHANGE FRONT CLEARANCE TO 18” TO MATCH
DIAGRAM. REMOVE “AND 11” BEYOND REAR”
THE DURANGO
™
WOODsTOvE
Model TR008
Owners Manual