Safety
16
WBV.XRP.003.EN XRC100QD SIK V6.0
WARNING
Skin and eye irritation caused by contact with hazardous working materials or media!
All work on the machine can lead to contact with working materials or media.
•
Personnel must wear suitable protective clothing.
•
The operator must inform his or her staff about any potentially hazardous substances in working
materials or media.
ATTENTION
Stones or other hard objects in the medium result in heavy wear of or even damage to the XRipper.
ATTENTION
Risk of frost!
To protect the XRipper against damage caused by frozen medium, drain the XRipper when there is a risk of
frost.
ATTENTION
Pull up the XRipper during temporary shutdowns.
To prevent solid matter from blocking up the XRipper inlet and causing problems when starting it up again,
the XRipper must be pulled up for temporary shutdown.
4.6 Main switch, maintenance and repair switch
All-pole disconnection must be provided for the main switch and maintenance and repair switch.
4.6.1 EMERGENCY STOP shutdown (main switch)
For shutdown in the event of an emergency, an emergency stop must be present and freely accessible at all
times.
4.6.2 Maintenance and repair switch
To safely exclude the possibility of unexpected machine start-up, a maintenance and repair switch must be
installed in the immediate vicinity of the electric drive so that the electrical power can be safely isolated for
maintenance purposes.
The maintenance and repair switch must be secured in its OFF position to prevent it being switched back on
again, using a padlock for example.
WARNING
Qualified technical personnel must connect and check the safety devices on a regular basis for proper
function, especially after performing maintenance and repair work and before start-up.
