Page 10
1.8 Home position, fine adjustment
When the lift is completely operational it may be necessary to do some fine adjustments
on the home position. This may be the case when the lift is used in combination with a
false ceiling and an exact closing position is needed.
PPL 1515
By adjusting the screw of the striker plate as shown in the photo (PPL 1515), the home
position of the lift system can be adjusted in a range of 10 cm. Determine the home
position by experimenting and correct it if necessary.
ATTENTION
Do NOT change the position of the lowest limit/position switch, which looks similar. Red-
blocked circle in picture.
PPL 2525
With PPL 2525 fine adjustment is possible by bending the micro switch arm a bit.
PPL 3535
Fine adjustment is not possible
Lift system manual
