PFW 6875
Installation Guide
Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d’Installation, Installatie gids
www.vogels.com | Europe +31 (0)40 26 47 400
PFW 6875 dedicated flat-panel spacers are engineered with the knowledge
that aligning each flat-panel on a large wall is time consuming and costly.
These model-specific spacers
are available for most flat-panels, which
significantly reduces the installation time. (Call Customer Service to inquire
about model specific spacers.)
Installing OPTIONAL Model Specific Spacers
This spacer is shown for illustration purposes only. Your spacer may
look different depending on the display model you are installing.
1)
Once your PFW 6875 is mounted in the desired location and
is level, align your spacer to the top left or right (depending on
your install direction) corner register tabs of your mount.
You may use commercially available hardware to secure the
spacer to the wall during installation (depending on the wall material).
You may utilize the same spacer for multiple PFW 6875 installations.
Start
Multiple PFW 6875 mounts can be installed using model specific spacers. Simply
repeat step one when installing each of the surrounding PFW 6875 mounts. Use
one spacer for each 2x2 installation by mounting it to the wall, or utilize the same
spacer as many times needed to complete an unlimited PFW 6875 large matrix
video wall.
1.
Make sure the spacer is plumb and level and mark each corner where the
PFW 6875 will be mounted (or secure to the wall). It is best to start from the
bottom corner and work your way up.
2.
Install the second mount working in a horizontal direction.
3.
Ensure that the mount remains plumb and level.
4.
Repeat this step for each mount horizontally
5.
To install multiple rows, place spacer between previously installed
PFW 6875’s on the bottom row. Make sure the spacer is plumb and level,
mark the corners (or secure to the wall) to be sure of where the PFW 6875
should be and secure your mount to the wall.
Page 6
12
13
13
