The calibration process must be performed before starting the research process,by
pressing Calibratition button.
Calibration
In the ground calibration settings interface, the user is asked to down the search coil from
the horizontal position to vertical with a height of 10 cm from the surface of the ground and
then scroll it right and left to complete the automatic calibration of the soil by analyzing the
magnetic nature of the soil to obtain the magnetic harmonic.
When the process is completed, a message appears on the screen stating that the
ground calibration is finished, and the user is asked to press Enter to return to the search
interface.
Note: If the calibration is not achieved, the user must repeat the previous steps.
Page 16
CALIBRATION SETTING
GROUND CLIBRATION IS DONE
PRESS ENTER
VALUE : 000
0%
VALUE
:
316
CALIBRATION
CALIBRATION SETTING
CALIBRATION SETTING
LIFT THE COIL 10 CM OFF THE
GROUND AND PRESS ENTER
