background image

18

Attendant Features

Attendant Day/Night/Special

The system’s Automatic Night Mode Feature can be overridden 
by the Attendant station. Any Attendant station user can press 
their DND button or a Soft Key to place the system into Night 
Mode.

To use this feature:

1.

Press the 

preprogrammed

 NIGHT SERVICE button once

(631, DND by default),

-or-

Use the Soft Key’s DND option when in an idle condition 
(LED is lit solid).

2.

Press the DND button or Soft Key again to activate the 
Special mode (LED flashes).

The DND button (by default) or Soft Key acts as a rotary 
in this manner, starting in the Day mode, Night mode, 
and Special mode.

When one Attendant activates this mode, other 
Attendant stations’ DND buttons are lit accordingly.

The Night Service feature provides a means to place 
the system in night mode or remove the system from 
night mode from any keyset, providing the system 
was put in night mode by the night service feature 
flexible button [604].

If the system was placed in night mode by the 
Attendant using the DND button, or if the system was 
placed in night mode by the automatic schedule, the 
night service flexible button cannot remove the 
system from night mode.

OR

Содержание Digital telephone



































































































































Отзывы: