Vodavi Digital telephone Скачать руководство пользователя

Страница: 28 / 130

ACD/UCD

To change the display to a different group:

Dial the ACD Supervisor Display code [577] on the dial pad,
followed by the ACD group you want to observe,

-or-

Press the

preprogrammed

flexible button.

ACD Supervisor Login/Logout

To log in to an ACD group:

Dial LOGIN CODE [576] on the dial pad, followed by the
desired ACD group number (5XX),

-or-

Press the

preprogrammed

button must have [576]+[5XX] programmed onto it.)

Enter your 4-digit SUPERVISOR ID code (0000-9999).

The LOGIN flexible button LED will light steady and a
confirmation tone will sound to verify the login process.

If active, an ACD login event will also be sent to the ACD
Events Trace port.

If the login sequence was started in the handsfree
mode, the ON/OFF LED will extinguish.

To log out of an ACD group:

Dial LOGOUT CODE [575] on the dial pad, followed by the
appropriate ACD group number (5XX),

-or-

Press the

preprogrammed

the LED will extinguish.

ACD Supervisor Log-in LED only lights for ACD group
assigned to that button.

The same flexible button can be used to toggle the
Login/Logout feature.

Содержание Digital telephone



































































































































Результаты поиска

Содержание Digital telephone

Отзывы:

Похожие инструкции для Digital telephone

Бренды по названию

Популярные бренды

Vodavi Digital telephone, Руководство пользователя

Результаты поиска

Содержание Digital telephone

Отзывы:

Похожие инструкции для Digital telephone

Бренды по названию

Популярные бренды