VocoPro GIG-STAR II Скачать руководство пользователя страница 20

Страница: 20 / 28

Rear Panel Descriptions

1. COAXIAL

(Digital) Output - This digital output is for connecting to devices with a digital coaxial input.

2. COMPONENT

Video Output - These jacks output VIDEO to a TV monitor via COMPONENT VIDEO cables. COMPONENT VIDEO outputs the

different color signals (U/Pb, V/Pr and R) and luminance signal (Y) separately in order to achieve high ﬁ delity in reproducing colors. The de-
scription of the component video output connectors might differ depending on the TV set or monitor (i.e. R/B/Y or Cr/Cb/Y or R-Y/B-Y/Y etc.).
Component video cables only transmit the video signal; separate cables are needed for audio signals. Please refer to the operating instructions
of the TV set or monitor for details.

3. S-VIDEO

Output - This jack outputs to a display device (TV, TFT, etc.) using an S-VIDEO cable. S-VIDEO provides better color separation and

better resolution by separating the color and picture signals of a composite-video signal.

4. POWER SELECTOR

This switch is used to select the voltage setting according to country. For use in the U.S. the voltage selector should be

set to 110V and 220V in Europe.

5. FUSE

terminal - This terminal houses the GIG STAR’s main system FUSE. NOTE: If fuse replacement is necessary, only replace with the same

type and rating of fuse.

6. AC POWER

outlet - This outlet provides AC POWER to an external device. NOTE: Do not connect any device with a power consumption level

higher than 200W.

7. AC~IN terminal

- Connect AC MAIN POWER CORD from the wall outlet to this terminal.

8. AV 1 INPUT

jacks - These jacks are for connecting AUDIO/VIDEO OUTPUT from external AV SOURCES. Connect RCA-style AV cables (R, W,

Y) from these jacks to the AV OUTPUT jacks on your external AV devices.

9. VIDEO OUT 1-2

jacks (RCA) - These jacks are for connecting the GIG STAR’s VIDEO OUTPUT to TV or DISPLAY devices. Connect RCA-type

patch cables from these jacks to the VIDEO INPUT jacks on the TV or display devices.

10. AUDIO OUT 1-2

jacks (RCA) - These jacks are for connecting the GIG STAR’s AUDIO OUTPUT to ampliﬁ ers, recording or mixing devices. Con-

nect paired RCA-type patch cables from these jacks to appropriate INPUT jacks on external audio devices.

11. BALANCED AUDIO OUTPUT

jacks - These XLR jacks are for connecting MASTER output to an external device with balanced cables.

12. BALANCED MIC 1-2 INPUT (XLR)

- These jacks are for connecting microphones via BALANCED XLR-type microphone cables.

NOTE: Both the XLR and ¼” MIC jacks cannot be used simultaneously for any given mic channel.

13. INTERNAL/EXTERNAL SPEAKER

selector - This selector toggles the GIG STAR’s master output to be played through either the BUILT-IN

speakers or EXTERNAL speakers connected to the EXTERNAL SPEAKER CONNECTORS.
NOTE: You cannot playback from both INTERNAL and EXTERNAL speakers simultaneously.

14. EXTERNAL SPEAKER

connectors - These connectors a re for connecting EXTERNAL SPEAKERS to be used for playback instead of the BUILT-

IN SPEAKERS. NOTE: Only connect one 8-ohm rated speaker to each speaker connector.

15. WIRELESS MODULE EXPANSION PORTS

- These ports are for installing compatible wireless microphone modules such as the VM-1 or UHF-

28.
Note: there is a ﬂ at ribbon cable nesting in each slot that would need to be connected during installation of the wireless modules.

�
��

��

��