Description and Controls
(cont.)
Front Panel (cont.)
6
16. MEMORY button - When pressed, this button loads the current
system setting configuration to MEMORY.
17. MUSIC DSP button - This button toggles through the different
DSP MODES available: LIVE, THEATRE, STADIUM, JAZZ, CHURCH,
HALL, USER, MOVIE and MUSIC.
Front Panel
16
17
18
19
20
21
22
23
24
NOTE: Depending on the settings in place during a
MEMORY SAVE and a MEMORY CALL, there may be
some settings that are unavailable if there has been a
system configuration change. For example, if you have
MIC 1 channel set with a particular reverb application
during a MEMORY SAVE, and then disable KARAOKE
mode, when the MEMORY CALL is attempted, no MIC
output will be available since it requires KARAOKE mode
to be enabled.
NOTE: Depending on the input source's connection
method, source disc encoding and DTX-9900K's audio
mode setting, some DSP settings will not be available.
MIC MASTER
VOLUME
AUTO
DISPLAY
TEST
TONE
DTX-9900K
MIC-IN
KARAOKE
DIGITAL KEY CONTROL
MASTER MENU
DIGITAL HOME THEATER KARAOKE AMPLIFIER WITH KEY CONTROL AND DIGITAL REVERB
POWER
MIC 1
MIC 2
MIC 3
MIC 2
MIC 1
PRO DIGITAL ECHO
SURROUND
D I G I T A L
D I G I T A L
S U R R O U N D ¥ E X
D O L B Y
S U R R O U N D
D O L B Y
P R O L O G I C
MUSIC VOLUME
AUTO
DETECT
KARAOKE
ON
OFF
ECHO
DELAY
REPEAT
EFFECT
MODE
CH.
MODE
INPUT
BASS
TREBLE
MUSIC
DSP
EQ
MODE
MEMORY
RECALL
DISPLAY
ON/OFF
MEMORY
#
LL
b
18. TREBLE button - This control increases/decreases the amount
of HIGH frequency response applied to the MASTER VOLUME output.
Once selected in the graphic display, use the buttons to
increase/decrease the TREBLE level.
19. BASS button - This control increases/decreases the amount of
LOW frequency response applied to the MASTER VOLUME output.
Once selected in the graphic display, use the buttons to
increase/decrease the BASS level.
20. INPUT button - This button toggles through all the INPUT
channels for available INPUT SOURCES.
21. DISPLAY ON/OFF button - This button toggles the GRAPHIC
DISPLAY ON/OFF.
22. CH. MODE button - This button is used to have the
MICROPHONE OUTPUT concentrated to particular sections of the
speaker matrix. Microphone output can be concentrated to the
FRONT L/R or CENTER speaker designations.
23. EFFECT MODE button - This button cycles through the available
DSP effects for vocal and music enhancement. The available modes
are REVERB 1-5, ECHO, HALL, LIVE, JAZZ, DISCO and MUSIC.
24. REPEAT button - Use this button to adjust the REPEAT setting of
the ECHO effect. Once selected, use the buttons to
increase/decrease the REPEAT level. As REPEAT adjusts the total
number of echo intervals prior to fade-out, the more REPEAT that is
applied, the more ECHO intervals will occur prior to fade-out. REPEAT
can be adjusted within a range of 0 to 99.
NOTE: This feature is only available when KARAOKE
MODE is set to ON. For optimal sound, the MAIN and
CENTER speakers should be connected and functioning
properly.
25. DELAY button - Use this button to adjust the DELAY setting of
the ECHO effect. Once selected in the graphic display, use the
buttons to increase/decrease the DELAY level. As DELAY adjusts
the total begin-to-end length of each echo interval, the more DELAY
that is applied, the longer each ECHO interval will take to complete.
DELAY can be adjusted within a range of 0 ms to 975 ms.
26. ECHO control - Use this button to adjust the level of ECHO
applied to the MIC channels. Once selected in the graphic display,
use the buttons to increase/decrease the ECHO level. ECHO can
be adjusted within a range of 0 to 40.
NOTE: This feature is only available when KARAOKE
MODE is set to ON.
NOTE: This feature is only available when KARAOKE
MODE is set to ON.
NOTE: This feature is only available when KARAOKE
MODE is set to ON.
NOTE: This feature is only available when KARAOKE
MODE is set to ON.
25
26
