VocoPro Drifter, Руководство пользователя

Страница: 12 / 16

12
Descriptions and Functions
1. Power Switch
-- Toggles main power ON or OFF
2. Light Switch
-- Turns lights ON or OFF
3. EQUALIZER
-- This EQ Band is used to BOOST and/or CUT particular frequencies. Each slide fader
processes a particular frequency range indicated by the number below it. Frequencies from 60Hz -
200Hz constitute the very low to low range. Frequencies from 200Hz to 1kHz are the mid-range and
frequencies from 1kHz to 16kHz make up the high to very high range. To adjust, slide the fader up to
boost the frequency presence and down to cut the frequency presence.
4. Mic Priority
-- This feature will automatically lower the music audio when you speak into the
microphone, when enabled. The music audio will come back once the microphone audio stops.
This feature allows for a presenter/ speaker or vocal artist to be heard more prominent over any
background music that may be playing
5. FM Antenna
-- Connect included FM antenna here for enhanced radio reception
6. Microphone Inputs 1 & 2 -- These jacks accepts Microphone level signals from wired or wireless
microphones.
7. Charge Indicator
-- Displays current battery power capacity status.
8. Guitar Input
-- This 1/4” jack accepts Line level signal from an instrument such as a guitar.
9. DC 15v Input
-- Connect appropriate power adapter here to recharge internal battery
10. Display
-- This screen displays system information such as track time, current input and track
number.
11. Prev/Next
-- Press Prev to jump to the previous track, and Next to jump to the next track.
12. PLAY/PAUSE
-- Use this button to start playback. Press once to start playback, once again to set
the pause mode, and once more to resume playback.
13. Input Mode
-- Use this button to cycle between available input modes (AUX, USB/SD, Bluetooth,
FM)
14. AUX Out
-- Use this connector to send line level mono audio output signal via RCA cable to a
separate device recording or monitoring set-up/device
15. Speaker Out
-- Plug a separate speaker here that is 4-8 ohm impedance rating. Connecting to this
amplified output will re-route the internal amplifier power. Do not connect an additional speaker here if
you wish to also connect the included line-array speaker tower.
16. MASTER Volume
-- Adjusts the overall loudness of all audio output
17. Main Bass
-- Adjust the amount of bass tones heard
18. Main Treble
-- Adjust the amount of treble heard present from main music.
19. Mic Echo
-- This knob attenuates the amount of echo effect applied to mic audio. Echo effect will
delay the sound with enough time so that you repeatedly hear exact copies of the original sound. This
effect gives an added ambience to the mic sound.
20. Mic Treble
-- This control increases/decreases the amount of HIGH (treble) frequency response
applied to the MIC channels. Turn clockwise to increase the HIGH frequency response and counter-
clockwise to decrease the HIGH frequency response
21. Mic Bass
-- This control increases/decreases the amount of LOW (bass) frequency response applied
to the MIC channels. Turn clockwise to increase the LOW frequency response and counter-clockwise
to decrease the LOW frequency response.
22. Mic Volume
-- This control increases and decreases the VOLUME level for the MIC channels. Turn
clockwise to increase MIC VOLUME and counter-clockwise to decrease the MIC VOLUME.
23. Guitar Volume
-- This control knob adjusts the volume for an instrument that is plugged into the GTR
1 or GTR 2 inputs.
24. Line In -- Connect a line level audio input here