VocoPro Drifter, Руководство пользователя

Страница: 10 / 16

10
Getting Connected
General Operation:
1. Connect the supplied power cord to the unit and then AC wall outlet.
2. Toggle the power switch on the control board of the unit to BATTERY when no charge, and to AC when
charging.
3. Press MODE button on the front of unit repeatedly to select the input source as:
USB/SD card mode, Line in mode, FM mode, Bluetooth mode.
Using a USB or micro SD for playback:
1.
Insert a USB flashdrive or micro SD card into the USB or SD card slot as shown.
Note: Make sure the SD card’s lock tab is NOT set to lock. This will prevent files from being recorded to
the SD card.
2.
Once a USB or Micro SD card is inserted, the input mode will automatically change and the display will
read “load”
3.
The Drifter will begin playback of your files right away
*unless the files stored are incompatible or corrupted
The Drifter utilizes a unique “resume” feature that allows the user to continue playback wherever the
song had been interrupted, in the event that the USB or SD card is removed or if the unit powers down
when the battery dies
Bluetooth Pairing:
1. Press MODE button and select BT mode.
2. Enable the bluetooth feature on your audio device and set it to discover the VOCOPRO DRIFTER.
3. Once the VOCOPRO DRIFTER appears listed under the newly found bluetooth devices, click to connect.
4. When pairing is successful, a tone will be heard through the speaker.
5. You can now start streaming audio through the speaker wirelessly from your favorite devices.
6. The speaker will re-pair automatically with memorized devices after being turned off and on again.
OR