4. Tap
New Pairing
. The device searches for Bluetooth devices and lists the names or Bluetooth
addresses of all devices it finds within range.
5. More than one Bluetooth device may appear on the handheld device's screen. Check the number on
sticker on your headset to be sure you select the right headset. Tap the number that identifies your
headset and then tap
Select
. The device may require you to enter the headset's passkey. The
passkey for all SRX headsets is 4444.
6. Put on the headset. After pairing, the headset repeatedly says the serial number of the device to
which it is paired. Look to see that the serial number on your device matches the number you hear.
7. Tap
on the device's screen to verify that your headset is paired with your device and begin
working.
Notes: The graphic in the upper right of the device's screen indicates the device's Bluetooth
status. The graphics are as follows:
= No pairing, no connection
= Handheld device is searching for Bluetooth devices
Page 3 of 5
SRX Proc Using the SRX Headset
29/8/2007
