User Manual Guide DECT vocalFON EN 10-2020 V971
7
von 30
2 Getting started
2.3
subscribe to DECT Base Station
alias:
„Subscription“
methode:
„easy subscription“ with PIN „0000“
Place the Device near the DECT Base Station e.g. in the same room. Subscription can be accomplished
more safely.
Find and press "DECT Subscription" or similar notified
button on the Base Station.
Manufacturer-specific enabling the DECT Subscription mode may be different. Usually press a button
for a few seconds (in case of consult the manual of the Base Station). Make sure that DECT Base
Stations are only 5 minutes in the Subscription mode. The Subscription of the Device must be made
within this time. In case of, re-enable the Subscription mode.
For starting Subscription procedure of the Device, press the
Call Button on the Device. The Ring LED starts flashing and
the Voice Assistant reports:
"Searching for Base Station, please wait"
After typically 10-20 seconds the Subscription is completed. The Ring LED shortly lights up green. The
Voice Assistant reports the successful subscription: "Device is registered"
If Subscription fails, the Voice Assistant gives dedicated information to the possible root cause
(see notes for Trouble Shooting in Chapter 5).
Modern DECT Base Stations use the Subscription method according "easy subscription" standard with
system PIN "0000". Should System PIN of Base Station be different from “0000”, then use Subscription
of Device via PC APP (see Chapter 3.4)
Note: If the Device is on the Charging Disc, it cannot perform Subscription.
The device switches automatically off after 10 minutes if it has not been registered.
