![vocalFON DECT PENDANT Скачать руководство пользователя страница 6](http://html.mh-extra.com/html/vocalfon/dect-pendant/dect-pendant_user-manual_1043413006.webp)
User Manual Guide DECT vocalFON EN 10-2020 V971
6
von 30
2 Getting started
2.2 place Charging Disc, charge Device, switch-on Device
Place the Charging Disc on a flat, non-slip surface and connect it to the
mains via the supplied USB power supply. The Charging Disc works
contactless.
Remark: If Device is switched-off, it can be switched-on only by placing
it on the Charging Disk
Please use the included rubber pegs to individually optimize your
placing of the device on the charge disk. Moreover these rubber pegs
prevent the device from accidental shifts.
The use of the rubber pegs is optional They do not have any
functional influence on the charging procedure.
Without prejudice to further possibilities we recommend shown positions:
In order to charge the Device, simply place it on the Charging Disc. Once the Device is correctly placed,
the Disc will light up. The Device switches on after a few seconds and the Voice Assistant reports to:
"Battery is charging"
During charging the Device warms up. This is no fault but normal.
Leave the Device on the Charging Disc for at least 30 min. In case of
fully charged, the Device has a standby time of max 3 days. Charge
the Device regularly, best overnight.
When the battery is deeply discharged, it may take up to 5 minutes
to turn on the device on the charging disc.
Please notice that only if the Device is on the Charging Disc, the Smoke Alarm detection is activated
(see 3.8 chap and chap 4.2)
You can use multiple Charging Disc; e.g. in living room and bedroom.
(Please contact your dealer).