G-106
25
a. Geometry adjustment to fit image on to curved screen.
b. Edge blending to enlarge the display with multiple active 3D projectors.
c. Image stacking to enhance the brightness using multiple active 3D projectors.
d. Format conversion: Convert Blue Ray 1080p 24Hz frame packed and PC or Nvidia 3D Vision
1080p 120Hz signals for active 3D display.
e. GeoBox can also convert 1080p 120Hz input into 1080p 60Hz output for passive 3D or 2D display.
12.1 Procedures for active 3D Setting
a. To select the output resolution in GeoBox to XGA (for XGA projector) or 720P (for projector native
resolution larger than 720P) through front panel or remote control hotkeys.
b. To set 3D output format at [XGA 120Hz output] or [720P 120Hz output] under 3D Properties menu.
c. If user selects other output resolution except XGA or 720P, [3D Ready] menu will be grayed out
and user can’t select 120Hz output.
d. Projector needs to have 3D Ready DLP Link or Nvidia 3D Vision function. This 3D function needs
to be open while playing active 3D.
e. It is possible for user to see inverse image in R/L eyes’ image. User need to swap R/L signal
through projector internal function [3D Sync Invert] or active 3D.
13 3D signal converted to Side by Side format
a. In additional projector active 3D and passive 3D application, G-106 can convert below 3D formats
into one Side by Side 3D format output to meet the requirement in most of 3D display:
--RH/LH discrete 3D format
--Line by line (line interleaved)
--Frame packing
--Frame sequential
--Top-bottom 3D.
b. G-106 setting for 3D signal conversion:
--Aspect ratio setting: [Image Properties]
[Scaling]
[Full Screen]
--POP mode setting: [Image Properties]
[PIP Setting]
[Display]
[POP]
[Source]—select the same input source as main input
