G-405 Quick User Manual Document: G-40501
------------------------------------------------------------------------------------------------------------------------------------------------
1
c
、
Press [OUTPUT] hotkey to select the output resolution. It will show the result on the screen. If this output
resolution is the same as display device, it will provide the best video quality.
d
、
Please press [INFO] key in remote controller to confirm final input and output information.
e
、
To set remote controller [OSD Time Out] hotkey to “0” to maintain OSD display while in setup stage.
5.
Individual channel control:
a
、
To set [Box ID] for each processing module through [Options]
[Setting]
[Box ID]. For example: to set
Upper module as #1 and Bottom module as #2 and the 2
nd
G-405 should be #3 and #4.
b
、
Press [851] number key, the remote controller will lock all processing modules except Box ID #1. Only ID
#1 processing module can be accessed and controlled.
c
、
Press [852] number key, then the remote controller will only control processing module with Box ID #2.
d
、
Press [850] number key, it will unlock all processing modules and remote controller can control all units at
the same time. It is convenient while doing [Video Wall] setting.
e
、
OSD can be locked while press [Menu] key for 5 seconds. Blinking LED on front panel means this module
is locked. Press [850] or Menu key for 5 seconds to unlocked it.
6.
Start video wall setting:
a
、
[Video Wall] Hotkey is available on front panel and also in IR remote controller.
b
、
[Zoom]: split the image for LCD. Please see User Manual Sect. 4.4.
c
、
[Pan]: assign image to each LCD.
d
、
[Overlap]: to set bezel correction and image position. Please see User Manual Sect. 4.4.3..
e
、
Irregular video wall position alignment, please see User Manual Sect. 5..
f
、
For easy position and bezel alignment, please download Test pattern from website: www.vnstw.com.
7.
Avoid Blanking border and adjust aspect ratio:
User can use [Overlap] setting to avoid blanking border or change image aspect ratio. Please see User Manual
Sect. 6.7.
8.
EDID setting to optimized video quality:
a
、
After finishing all settings, to activate [Option]
[Settings]
[EDID] menu and set optimized input signal
resolution (please see User Manual Sect. 8.4). It may be necessary to set PC or Media Player output
resolution manually in some case.
b
、
EDID can be saved together with different display Profile to get the best result in all cases.
9.
Power on/Off settings:
User can access to OSD menu [Options]
[Accessibility]
[Standby Time Out] to set the time to terminate
output signal while no input signal is detected. If it is set to [60], it will automatically turn off output signal in 60
seconds while no input signal is detected. When it detects input signal, it will turn on again automatically.
10. Save final setting:
Please go to [Options]
[Settings]
[Profile]
[Save] to save the settings. When power off the system, it will
maintain the setting without change. User can load the setting again from [Profile] hotkey on remote controller.
11. Load [Profile] into the system:
[Profile] hotkey is available on remote controller. User can press [Profile] key, then select the [Number] key to
load the Index saved by user.
