G-405 Quick User Manual Document: G-40501
------------------------------------------------------------------------------------------------------------------------------------------------
10
4.3 Procedures for Video Wall setting
4.3.1
System connection: If G-405 is located at the back of LCD, user needs to connect IR receiver extender to
the locations that user can control by remote controller. Please adjust the direction of IR receiver so that
remote controller can access it. User can use Audio cable or Ethernet cable to extend the distance. IR is
possible to be interfered by the environment devices and shorten distance or slow response
4.3.2
User can connect any G-405 output to any LCD. The location can be determined by [PAN] function.
4.3.3
Power on system: User should be able to see the same image in all LCD.
4.3.4
Press [INPUT] hotkey to select input port on both processing modules. User can see input port message
on the screen. Default is [HDMI A] input port.
4.3.5
Press [OUTPUT] hotkey to select the output resolution. If this output resolution is the same as display
device, it will give the best video quality.
4.3.6
Please press [INFO] key in remote controller to confirm final input and output information.
4.3.7
System reset: With remote controller to reset G-405 to default setting in both processing modules.
4.3.8
To set OSD time out: To set [OSD Timeout] to “0” to maintain OSD menu on the screen all the time.
4.3.9
To set Box ID: To set [Options]—[Setting]—[Box ID], Module A=1, Module B=2 for convenient IR control.
When pressing [851] on remote controller, user will only control Module A, [852] to control module B and
[850] to control both A&B at the same time.
4.3.10 User can lock OSD menu in one module by pressing [MENU] key for 5 seconds for easy OSD operation
in another module. If press [MENU] for 5 seconds again, it will unlock OSD menu.
4.3.11 Apply grid pattern: Test pattern is required for easy image alignment. This pattern should be full screen
still image and can be photo, Power Point, PDF or Excel files. Proposed resolution is 1080p.
4.3.12 VNS provides JPG pattern file for the adjustment. Please download from website at www.vnstw.com.
4.3.13 Start video wall setting. Please see Sect. 4.4.in User Manual. For bezel correction, please see Sect. 5.1
in User Manual.
4.3.14 Irregular video wall position alignment, please see Sect. 5.2 in User Manual.
4.3.15 User can use [Overlap] setting to avoid blanking border or change image aspect ratio. Please see User
Manual Sect. 6.7.
4.3.16 To activate [Option]
[Settings]
[EDID] menu and set optimized input signal resolution. It may be
necessary to set PC or Media Player output resolution manually in some case.
4.3.17 Please go to [Options]
[Settings]
[Profile]
[Save] to save the settings. When power off the system,
it will maintain the setting without change. If necessary, user can load the setting again from [Profile]
hotkey on remote controller.
