VMI VIBER X3, Руководство пользователя

Страница: 23 / 60

Vibraon Measurement Instruments
21
10 Balancing with VIBER X3™
This chapter describes how you can perform balancing with your instrument
The 3-Point Balancing method does not need any additional hardware exept
for the VIBER X3™ instrument and the accelerometer. Mount the acce-
lerometer on the bearing and in the direction where you have the highest
vibration caused by unbalance. Use this measuring point for all following
measurements. If you need to leave the place during the balancing proce-
dure, disconnect the accelerometer BNC connector from the instrument and
leave the accelerometer at the point from where the measurements are taken.
If this is not possible, mark the position with a pen or paint! It is important
that it is only the trial weights that will influence the vibrations and not the
change in vibrations due to a different position of the transducer.