5
4.
During the weigh measurement, the display will flash “---” and your weight will
appear. Next, the display will flash “---” and your body fat percentage will be
shown. Following that, your body water percentage will also be shown.
5.
The scale will turn off automatically after a few seconds.
NOTE: It is normal for your weight to vary during a day and from one day to another,
slight changes in weight are generally normal.
CAUTION!
If “E” appears on the display, an error has occurred. Step off the scale and carefully
repeat the steps again. The “E” will appear if:
1.
You step on the scale before “0.0” displays.
2.
The load is greater than the maximum capacity(330 lb/150kg/23st). NEVER
apply a load beyond the maximum capacity.
Weight-only Usage
You can also easily obtain an accurate weight-only reading.
* Place the scale on a flat, level surface. A hard surface is best for maximum accuracy.
Placing the scale on a rug or carpet may affect the scale’s weighing accuracy.
1.
Tap on the scale platform with the ball of your foot to activate the scale.
2.
Wait until “0.0” is displayed.
3.
Step on the scale and stand still. The display will flash “---” and your weight will
be shown.
4.
The scale will turn off automatically after a few seconds.
