4
shown on the display; then press the SET button.
5.
Once you have entered your information, wait until the display shows “0.0”. Your
profile is now programmed into the selected user button and the scale is ready for
use.
Repeat Steps 1-5 to program another user’s profile.
NOTE: If a button is not pushed within 20 seconds during programming, “0.0” will
be displayed. Wait until the unit turns off and return to Step 1 to continue set
up.
If the scale is operating in the Kilograms (KG) mode, the height will be set in
centimeters (CM).
If the scale is operating in the Stone (ST) mode, the height will be set in Inch.
Monitoring Your Weight and Body Fat Composition
* Make sure you have programmed your personal data into the scale.
* Place the scale on a flat, level surface. A hard surface is best to achieve maximum
accuracy. Placing the scale on a rug or carpet may affect the scale’s weighing
accuracy.
1.
Gently press your personal user number with your toe. Your personal profile will
appear on the screen.
2.
Please wait until “0.0” and “0.0%” appears on the display.
3.
Stand on the scale (bare feet only!) so the balls of your feet are on the upper silver
pads, heels are on the lower silver pads.
NOTE: For accurate body fat estimates, always measure with dry bare feet.
