Depósito legal y copyright 2016. Todos los derechos reservados.
9
PRO LIFTS S.L.
Quick operation guide
ENGLISH
4. USER INSTRUCTIONS.
4.1 -
Place the lift on its working position,
in a firm, flat surface with the help of the
swivel wheels (
T
).
4.2 -
Remove the legs from their trans-
port supports (
S
) and fully insert them into
their working positions (
V
) checking that
they are fixed by the catches (
R
). Check
that the lift is in vertical position using the
spirit level (
L
) at the base profile, adjust
the stabilizer (
Q
), turning the handle (
H
)
if necesary.
4.3 - THE MAXIMUM LOAD IS 220 Kg
(485 lb).
The lift should NEVER be over-
loaded (over 220 Kg). Safety at work is
the most important issue. Untighten the
screw
(A
) and place the load onto the lift
using an adequate support according to
the need, use so that the weight of the
load will only be elevated in a vertical di-
rection. The minimum load is 25 Kg.
4.4 -
Elevation:
Turn the winch crank
clockwise (
N
1
) to lift the tower, the red
ALS lock enable the lift to rise and auto
-
matically block the profiles whilst rising,
ensuring that the load will never fall.
4.5 -
Blocking:
Once the system is eleva-
ted to its required height, gently turn the
handle in an anti-clockwise (
N
2
) direction
to introduce the ALS locks in its corres
-
ponding hole and block the profiles. The
ALS lock will take the pressure of the load
and release strain applied on the cable.
Security system ALS
The TE-71 incorporates the patented
security system ALS (Automatic Lock
Security). This VMB red trigger system
automatically blocks the tower in the posi
-
tion it is left in. Each section of lift has an
ALS that blocks the section in the unlikely
event of the cable breaking.
4.6 -
Lowering:
To bring the lift down you
need to first turn the winch handle slightly
clockwise (
N
1
) and at the same time pull
the red
ALS-1
lock out. This releases the
blocking systems. Then turn the handle
anti-clockwise (
N
2
), whilst maintaining
the
ALS-1
lock pulled out until the profile
has been completely lowered. All red ALS
locks should be pulled out one by one
whilst the handle is turned anti-clockwise
and the profiles are brought down, one by
one.
CAUTION
When two towers are used to elevate a
bridge, down truss or many towers to ele-
vate a structure of any type, it is almost
3.17 -
Only original replacement parts should be used.
ORIGINAL
Содержание TE-071
Страница 30: ...Dep sito legal y copyright 2016 Todos los derechos reservados 30 PRO LIFTS S L...
Страница 31: ......
