E
N
4.3 Vmarker pen: operation
The new Vmarker pen has a power switch, 2
double action push buttons
on the side,
and a
double action
tip.
The Vmarker pen is switched on by sliding the power switch to the tip of the pen. By sliding
the switch to the back, the pen is switched off.
The tip and the push-buttons have two positions when pushing them. If you press the
button/tip until the first resistance, you activate the primary action. If you press beyond that
first resistance the secondary action is activated.
By default the following actions are set for the different button actions:
For the tip switch: the primary action and the secondary action both use the IR-sensor to
position the cursor and generate a left-mouse-click.
The double action button A pressed halfway, uses the IR-sensor to position the cursor and
generates a left-mouse-click. When fully pressed the Gyro-sensor is used to position the
cursor and also a left-mouse-click is generated.
When pressing the double action button B halfway the IR-sensor is used to position the
cursor now it generates a right-mouse-click. When fully pressed the Gyro-sensor is used to
position the cursor and the cursor hovers without lef or right-mouse-click.
It is possible to choose which sensor to use and which mouse action to generate for each
of the different button actions.
Vmarker Interactive Whiteboard
23
double action button A
halfway or fully pressed
double action button B
halfway or fully pressed
on off
tip switch = pressed halfway or fully pressed
