E
N
3.3.4 VmarkerUtility: Pen settings
On the Pen settings tab you can configure the behaviour of the Vmarker pen II.
3.3.4.1 Pen pairing
In the section ‘Pen pairing’ you can find information about the Vmarker pen II which is
connected to the sensor.
Pen ID, shows the unique id of the Vmarker pen II which is connected. The Vmarker
sensor II only will react to this Vmarker pen II.
Channel shows the selected channel which is used to connect the Vmarker II pen. You can
select a different Channel if you suspect the channel is already used by neighbour
Vmarker sensors.
With the ‘Pair pen’ button you can connect a Vmarker pen II to the sensor. After the
pressing the button, the sensor listens for about 30 seconds for a Vmarker pen II. On the
Vmarker pen II you have to press both button A and B fully and hold. When the sensor has
found the Vmarker pen it stops searching and the pen is set to the same channel. You
should get an update on the battery info. From now the Vmarker sensor II will respond to
the Vmark pen II.
3.3.4.2 Pen state
Here you can see the battery information.
Vmarker Interactive Whiteboard
19
