PAGE 2
TM
DEHAVILLAND BEAVER 120 ARF
INTRODUCTION.
Model airplanes, model engines, model engine fuel, propel-
lers and products such as the VMAR DeHavilland Beaver
can be hazardous if improperly used. Be cautious and
follow all safety recommendations when using your VMAR
DeHavilland Beaver. Keep hands, tools, clothing and all
foreign objects well clear of engines when they are operat-
ing. Take particular care to safeguard and protect your
eyes and fingers and the eyes and fingers of other persons
who may be nearby. Use only a good quality propeller that
has no cracks or flaws. Stay clear of the propeller and stay
clear of the plane of rotation defined by the propeller.
The Manufacturer, Distributor, Retailer and/or other suppli-
ers of this product expressly disclaim any warranties or
representations, either expressed or implied, including but
not limited to implied warranties of fitness for the purposes
of achieving and sustaining remotely controlled flight.
In no event will the Manufacturer, Distributor, Retailer and/
or other suppliers of this product have any obligation
arising from contract or tort, or for loss of revenue or profit,
or for indirect, special, incidental, consequential or other
damages arising from the use of this product.
In purchasing and/or using this product, the user accepts
all responsibility for its use and accepts all liability associ-
ated with such use.
Liability Disclaimer
It is important that the following liability disclaimer be
READ BEFORE ASSEMBLING OR USING THIS PRODUCT
Proceeding with assembly and
use of this product
indicates
Agreement With and
Acceptance of the Liability Disclaimer.
CAUTION.
A Remote Control Model Aircraft is not a toy. It is
a flying model that functions much like a full size
airplane. If you do not assemble and operate this
product properly you can cause injury to your-
self and others and damage property. DO NOT
FLY this model if you are not qualified.
You are ultimately responsible for the mechani-
cal, aeronautical and electrical integrity of this
model and it's structure, control surfaces,
hinges, linkages, covering, engine, radio, wiring,
battery and all other components. Check all
components before and after each flight. Don't
fly until it's right!
Thank you for purchasing a VMAR Product.
VMAR
Manufacturing is committed to delivering superior value to
the RC modeller. Your new VMAR DeHavilland Beaver is a
market leader in features, value, ease of use and flexibility.
Please review these instructions before beginning the
simple assembly procedure.
Whenever we’ve used the directional terms left or right,
they are with respect to the modelwhen viewed as you
would from sitting in the cockpit... that is when viewed
from the back looking forward.
The DeHavilland Beaver from VMAR Manufacturing carries
on the VMAR tradition of offering RC Flyers an easy to fly,
easy to assemble and top value Almost Ready to Fly RC
model. Nothing comes close to the value of a VMAR ARF.
Fantastic quality, outstanding graphic scheme and details,
unbeatable value, knock ‘em dead looks, more features
and a price you just cannot beat!
The VMAR DeHavilland Beaver incorporates some unique
features that you normally do not find on ARF's. Check out
the rudder, elevator, ailerons and flaps and you will see that
all the surfaces have been preinstalled with hinges that
have been double pinned on each side of the hinge line.
Take a look inside the fuselage and you will notice double
metal push rods running to the rudder and to the elevator.
The double pushrod system allows you to use lower cost
standard servos while maintaing the utmost in strong
reliable control.
We've also included two univerally adjustable servo trays
that will accept most standard servos. Once you see how
our servo tray works, you’ll be trying to buy ‘em as a part!
Check out the parts bags and you will notice that we've
included a pair of solid cast aluminum T-beam engine
mounts that have been drilled and tapped and come with
black allen head machine screws and engine clamp straps.
Also included are four Y harnesses for coupling your servos
together and pre-installed aileron and flap extensions set
within tubes in the wings for easy maintenance!
TM
This space left intentionally blank
