Vlemua CM4216-B, Руководство пользователя

Страница: 5 / 6

CAUTION: Be sure to unplug this appliance before
cleaning. To protect against electrical shock, do not
immerse cord, plug or unit in water or liquid. After each
use, always make sure plug is first removed from wall
outlet.
1) Clean all detachable parts after each use in hot, sudsy
water.
2) Wipe the product’s exterior surface with a soft, damp
cloth to remove stains.
3) Water droplets may buildup in the area above the
funnel and drip onto the product base during brewing. To
control the dripping, wipe off the area with a clean, dry
cloth after each use of the product.
4) Use a damp cloth to gently wipe the keeping warm
plate. Never use abrasive cleaner to clean it.
5) Replace all parts and keep for next use.
CLEANING AND MAINTENANCE
To keep your coffee maker operating efficiently, you
should clean away the mineral deposits left by the water
regularly according to the water quality in your area and
the frequency use the appliance, the detail is as follows:
1. Fill the water tank with water and descaler to the
maximum level in the gauge of coffee maker (the scale
of water and descaler is 4:1, the detail refers to the
instruction of descaler. Please use “household descaler”,
you can use the citric acid instead of the descaler (the
one hundred parts of water and three parts of citric acid).
REMOVING MINERAL DEPOSITS
NOTE: To activate the DELAY BREW cycle, see the
“Brewing Coffee Later” section.
NOTE: After about 10 seconds normal clock time will
appear. To check the programmed
time, push the PROGRAM button until you see TIMER on
the display. The display will show the time you have
programmed the coffee to brew.
If the power supply has been broken off or unplug the
power cord unintentionally during operation, the appli-
ance will be continued previous operation automatically
from the point when the disconnection occurred provided
that the pause does not exceed 10s, even without
pressing any button. In the event the pause time exceeds
10, the display shows the default setting, the appliance
must be re-started.
MEMORY