Vlectro VL-AT, Руководство пользователя

Страница: 4 / 77

Vlectro VL-AT
⚫ Insert 2 x 1.5V alkaline batteries (AAA) into the battery compartment.
3.
Power ON/OFF
3.1 Power ON
After insert batteries, keep press key for 2,
5s until device with “di-di” voice warning,
then device enter into the warm-up mode, interface show as following picture
Power on interface
3.2 Power OFF
Under warm-up and Heating state, keep press for 2,5s, the device will power off;
When the result is displayed, without any key operation within 60s, device will power off
automatically.
Power Off interface
4.
Formal Test
4.1 Intelligent self-checking
Turn on the device, will enter into the warm-up state automatically, to reset the sensor
into a better working state, interface as following picture
Warm-up mode